180V 3HP Treadmill Motor DC Universal Permanent Magnet
Motor
Use according to our method, your engine will not be damaged so easily.
Product parameters:
Skills requirement
1. The maximum working voltage of the motor should not exceed the rated voltage, and the voltage ripple should be as small as possible;
2. Motor wire: the red wire is connected to the positive pole, the black wire is connected to the negative pole, and the yellow and green color combination wire is grounded;
3. The motor grounding must be reliable;
4. Under normal temperature, the motor terminal and end cover can withstand the voltage test AC1800V/50HZ/5mA/1s without failure;
5. The motor runs under the rated voltage, no abnormal vibration, no abnormal noise;
6.From the drive end, the motor rotates clockwise;
7. When idling, the motor power meets the following requirements:
A: 110mm
B: 103 mm
C: 45 mm
D: 265 mm
Notice: If you need to order a motor, please provide us with ABC D dimensions.
Also provide us with a photo of your old engine
Our engines can only replace yours. However, our engine is not quite the same as your original engine.
NOTE: 1. It is recommended to add more [special silicone oil] under the treadmill belt every half a month to maintain lubrication and reduce resistance. Every time you use it, you should use it in [fast running] instead of [slow walking], which can extend the life of your treadmill.
2.It is recommended to take half an hour, rest for half an hour, use another half hour, and rest for another half hour.
3. Speed below 5 kilometers per hour belongs to very low speed operation, and the motor has poor heat dissipation,
It is easy to cause the engine to heat up, and the running time must not exceed one minute, and it should take a few minutes to run at low speed
Please accelerate to more than 7 km as soon as possible.
2. It can run continuously for 120 minutes at a speed of more than 7 kilometers per hour.
